| | |
|
| |
| | |
|
|
Propex HeatSource HS2000 6,500 BTU Forced Air Propane Heater 12 Volt
Retail Price: $867.79
Our Price: $650.84
You Save: $216.95 (25 %)
Item Number: HS2000
Manufacturer: Propex Heatsource
Manufacturer Part No: HS2000
|
|
Heatsource HS2000 Air Heater
|
|
Heat Output
|
6,484 BTU
|
| Voltage
|
12 Volt
|
Current Consumption
|
1.4 Amp
|
Air Throughput
|
60 CFM
|
| Fuel
|
Propane Gas
|
Average Gas Consumption
|
14 Hours / Gallon
|
(continuous running)
|
|
| Length
|
12.6 Inches
|
| Width
|
6.8 Inches
|
| Height
|
4 Inches
|
Supplied with room thermostat and basic wiring harness.
Mounting brackets sold separately.
Order PRO-700 for marine wall mount or PRO-188 for RV "through the floor" mounting.
The HS2000 Uses 22mm Exhaust Tubing, 1" Combustion Intake Hose and 60mm Hot Air Ducting.
You will need to add some of the products below for a complete install kit.
|
Item HTR-1
1" Highly Durable Plastic-Wound Ducting
Sold by the foot up to 50 feet.
|
Proheat PRO-80-WYE
High temperature 80mm true wye. This duct wye can be used in all Marine hot air heating systems.. Adapters available for this wye to adapt to different duct sizes.
|
Proheat PRO-80-60
High temperature 80mm x 60mm adapter for use with PRO-80-WYE. This duct adapter snaps into the PRO-80-WYE to adapt one of the ducts to 60mm and can be used in all hot air heating systems.
|
Item #W002-170NUT
22mm Stainless Horizontal outlet nut style exhaust thru hull. Includes heat resistant gaskets. For Webasto or other marine heaters using 22mm exhaust.
|
Item #75135K-15
15 Amp Inline Manual Reset Breaker Kit A main system breaker to protect the entire heating system. Includes rubber wire boots. Per ABYC standards this should be installed within 72" of the battery connection.
|
Retail Price: $88.29
Our Price: $66.22
You Save: $22.07 (25 %)
ITEM #PRO-700
Marine Wall Mount Bracket for Propex HS2000 6,500 BTU Forced Air Heater.
Stainless Steel.
|
Item #W337-390
22mm Stainless steel flexible exhaust. Sold by the foot up to 20 meters (66 feet). For Webasto or other marine heaters using 22mm exhaust.
|
Item #W913-83B
22mm to 24mm stainless steel exhaust clamp. For Webasto or other marine heaters using 22mm to 24mm exhaust.
|
Item #W001-434
22mm-24mm-30mm high temperature exhaust insulation (shown with optional stand-offs and clamps).
|
CLA-016 S/S Double Band Hose Clamp Min. 1/2" - Max. 1-1/2" Opening
300 Series Stainless Steel Band and Housing with Extended Band to Protect Clamped Surface with a 300 series Stainless Steel Deep Slotted 5/16" Hex Head Screw
|
Retail Price: $8.64
Our Price: $6.05
You Save: $2.59 (30 %)
Item #PERM-81878
Permatex Ultra Copper. High temperature RTV Sealant for joints in the flexible exhaust systems and for the bedding of exhaust thru hulls.
|
Item 398-497
60MM High Temperature Ducting for Marine Forced Air Heaters
Sold in 5 or 10 Foot Increments.
|
1" Combustion Air Intake Thru Hull
|
Propex PRO-80-VENT-2 High temperature 80mm Closable Grille
High temperature 80mm Closable grille. This grille can be used in all Marine hot air heating systems. Available in black.
|
Propex PRO-80-VENT High temperature 80mm Non Closable Grille
Adjustable grille. This grille can be used in all Marine hot air heating systems. Available in black.
|
CLA-036 S/S Double Band Hose Clamp Min. 1" - Max. 2-11/16" Opening
300 Series Stainless Steel Band and Housing with Extended Band to Protect Clamped Surface with a 300 series Stainless Steel Deep Slotted 5/16" Hex Head Screw
| | |
|
|
|