Retail Price: $210.52
Our Price: $189.47
You Save: $21.05 (10 %)
The REAL Heat 6013 3,500 Btu Marine Hydronic Fan Heater has a 3-inch outlet designed to duct airflow to an adjacent space or to accommodate tight installations. This kit includes three feet of 3-inch duct and a 3-inch grille.
|
Retail Price: $301.33
Our Price: $271.20
You Save: $30.13 (10 %)
The REAL Heat 6414 14,000 Btu Marine Hydronic Fan Heater has a 4-inch outlet designed to duct airflow to adjacent spaces or to accommodate tight installations. This kit comes with four feet of 4-inch duct and one 4-inch grille.
|
Retail Price: $330.15
Our Price: $297.14
You Save: $33.01 (10 %)
The REAL Heat 6424 14,000 Btu Marine Hydronic Fan Heater provides two 4 inch outlets designed to split the airflow to separate spaces or to accommodate tight installations. This kit comes with six feet of 4-inch duct and two 4-inch grilles.
|
Item #77649
Furnace cement. Sealant for joints in the exhaust system. Capable for use on all systems.
|
Retail Price: $8.22
Our Price: $6.17
You Save: $2.05 (25 %)
Item #PERM-81878
Permatex Ultra Copper. High temperature RTV Sealant for joints in the flexible exhaust systems and for the bedding of exhaust thru hulls.
|
Item #W002-109
1-1/2" Stainless Horizontal outlet exhaust thru hull. Includes heat resistant gaskets. Belled on one end. For Webasto or other heaters using 1-1/2" rigid exhaust.
|
Item #W005-110
1-1/2" Stainless long exhaust elbow with condensation drain for rigid exhaust. Belled on one end. For Webasto or other marine heaters using 1-1/2" rigid exhaust.
|
Item #W005-111
1-1/2" Stainless In-line exhaust muffler. Approximately 15" overall length. Belled on one end. For Webasto or other marine heaters using 1-1/2" rigid exhaust.
|
Item #W001-214
1-1/2" Stainless steel rigid exhaust. Sold by the foot up to 20 feet. For Webasto or other marine heaters using 1-1/2" exhaust.
|
Item #W002-780
1-1/2" stainless steel exhaust clamp. For Webasto or other marine heaters using 1-1/2" exhaust.
|
Item #W001-441
1-1/2" Marine lace-on high temperature exhaust insulation (shown installed on exhaust tube). Available in finished lengths of 1 ft, 2 ft, 3 ft, 4 ft, and 5 ft. Specify lengths and quantities when ordering.
|
Item #001-010
3/16" Copper Fuel Line.
|
Gar-Ber #W11BVR
Fuel Filter KitIncludes filter housing, filter, mount bracket, valve, and fittings to adapt to 3/16" copper line. Other adapters available upon request.
|
Simple Comfort #SC1600B
Digital Thermostat with ON/OFF Switch and Integral Indicator Light Thermostat has a temperature range of 45 to 90 degrees F and an adjustable temperature differential of 1 to 3 degrees.
|
Item #W002-911.36
Hi/Low Switch with Off For one or more 12 volt fans with a total amp draw of up to 0.52 amps.
|
Item #W002-911.70
Hi/Low Switch with Off For one or more 12 volt fans with a total amp draw of up to 0.99 amps.
|
Item #W005-212-KIT
3/4" Hose Inline Aquastat For control of system fan heaters. It will keep all fans in the system off until the system reaches 110 degrees F.
|
Item #75135K-20
20 Amp Inline Manual Reset Breaker Kit A main system breaker to protect the entire heating system. Includes rubber wire boots. Per ABYC standards this should be installed within 72" of the battery connection.
|
Item #W002-103
This 9" diameter tank is made of steel and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with over 10 gallons capacity like the DBW2010.
|
3/4" (19.1) "Boston Bosflex" Commercial Grade Heater Hose
Reinforced specifically for use in heating systems. Rated 225 P.S.I.
Sold by the foot.
|
W005-217 Powder Coated Mount Bracket for Webasto Thermo90 Hydronic Heater
|
CLA-016 S/S Double Band Hose Clamp Min. 1/2" - Max. 1-1/2" Opening
300 Series Stainless Steel Band and Housing with Extended Band to Protect Clamped Surface with a 300 series Stainless Steel Deep Slotted 5/16" Hex Head Screw
|
1-1/4" Combustion Air Intake Thru Hull
|
CLA-012 S/S Double Band Hose Clamp Min. 1/2" - Max. 1-1/4" Opening
300 Series Stainless Steel Band and Housing with Extended Band to Protect Clamped Surface with a 300 series Stainless Steel Deep Slotted 5/16" Hex Head Screw
|
STA-CLEAN Antifreeze - Propylene Glycol Low Silicate SCA-Precharged
Gallon
|
3/4" Brass Hose Barb x 3/4" Brass Hose Barb Ball Valve
Hose Barb to Hose Barb Brass Ball Shutoff Valve
|
3/4" Hose Inline Boiler Drain Ball Valve with 3/4" Male Garden Hose Drain Port
Inline Brass Boiler Drain Ball Valve with 3/4" Male Garden Hose Drain Port
|
Retail Price: $31.99
Our Price: $27.19
You Save: $4.80 (15 %)
Item #001-055KIT Combustion Air Intake Silencer for 22mm, 24mm, 1" & 1-1/4"
5 foot long with hose clamps
Combustion Intake muffler / supply
| | |