| | |
|
| |
| | |
|
|
Expansion and Buffer Tanks
Item #SK3088
This 2" diameter tank is made of copper and comes with 3/4" beaded hose barbs. It can be used to remotely fill a system. Must be installed at the highest point. Not for use with pressurized systems.
|
Item #W002-674
This 5" diameter tank is made of copper and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with up to a 5 gallon capacity like the TSL17.
|
Retail Price: $273.45
Our Price: $246.10
You Save: $27.35 (10 %)
Item #W002-512
This 5" diameter tank is made of copper and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with up to a 5 gallon capacity like the TSL17.
|
Item #W002-102
This 8" diameter tank is made of steel and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with up to a 5 gallon capacity like the TSL17.
|
Retail Price: $330.79
Our Price: $297.71
You Save: $33.08 (10 %)
Item #W002-103CH
This 6" diameter tank is made of copper and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with up to a 9.5 gallon capacity like the T90ST
|
Retail Price: $330.79
Our Price: $297.71
You Save: $33.08 (10 %)
Item #W002-103CV
This 6" diameter tank is made of copper and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with up to a 9.5 gallon capacity like the T90ST
|
Item #W002-103
This 9" diameter tank is made of steel and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with over 10 gallons capacity like the DBW2010.
|
Item #W002-105
This 12" diameter tank is made of steel and comes with 3/4" FNPT fittings, mount brackets, and 7# pressure cap. It can be used in Webasto or other marine hydronic heating systems with over 10 gallons capacity like the DBW2020.
|
Item #W002-103B
This 9" diameter tank is made of steel and comes with 3/4" FNPT fittings, mount brackets, and air bleeder. The greater volume of water your marine hydronic heating system has the less likely it will short cycle.
|
Item #W002-105B
This 12" diameter tank is made of steel and comes with 3/4" FNPT fittings, mount brackets, and air bleeder. The greater volume of water your marine hydronic heating system has the less likely it will short cycle.
|
Item #001-395
Similar to the overflow tank on your engine, the plastic overflow tank is designed to hold coolant that escapes from the pressure cap on an expansion tank. Kit includes mount and hardware for connection to expansion tank.
| |
|
|
|