PM500 5011371A Submersible Seawater Pump 500 GPH, 230V, by Webasto
3/4" FPT x 1/2" MPT
Pump Features:
Pumps 500 gallons/hr
Run Dry and Thermal Overload Protection
In a Run Dry scenario, the pump will shut down. Simply let it cool down or hose it down to assist
Available in 115V or 230V
One Phase, all cords are six feet in length and are U.L. LISTED 18/3 wire
The pump is not self-priming and requires a flooded suction
Run Dry Protection to Keep You Cool
The PM500 is a magnetically driven pump with no shaft seal. The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection. When re-assembling the pump for service, make sure all “O“ rings are properly seated. See the repair parts list for a breakdown of replacement parts.
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.
