This 2-Channel Dimmer Module provides dimming for “PWM Enabled” 2-wire Imtra PowerLED Downlights and supports a broad range of lighting configurations and control methods.
The ILIM80130 can control a large number of PowerLED Downlights on each channel, only limited by the total current being drawn. It supports PWM current switching of up to 7A per channel (168W/12VDC and 336W/24VDC combined). It also supports Imtra 3-wire Bi-color Downlights.
Control interfaces are provided to support:
Single and dual momentary pushbuttons
0-10v analog control (external voltage or potentiometer)
4-20ma analog control
The two channels may be operated as totally independent lighting zones or “Paired” together so that both channels are controlled in unison.
Provides smooth dimming control to Imtra 2-wire PowerLEDs
Supports bi-color dimming with a single momentary switch
Operates two zones independently or in unison (paired mode)
Supports 4-20mA analog input (from external control system)
Supports 0-10V potentioneter control (100k ohm)
Supports 0-10V analog input (from external control system)
Mounts with supplied brackets (or with 35mm DIN rail)
Name
Description
Certifications & Compliance Dimensions Dimmer Control Interface Housing Finish/Material Ingress Protection Input Voltage Install Location Load Rating Manufacturer Max Operating Temperature Warranty
CE, ROHS 4.13" l x 3.39" w x 2.32"h NO momentary, 0-10V analog external, 0-10V potentiometer, 4-20mA external White/PC IP40 (applies only to frontal water exposure, i.e. Exposed surface) 10-40VDC Dry 7A/channel (14A combined) Imtra 49°C (120°F) 2 Years Finish
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.