This 1-Channel Dimmer Module provides dimming for “PWM Enabled” 2-wire Imtra PowerLED Downlights and supports a broad range of lighting configurations and control methods.
The ILIM80140 can control a large number of PowerLED Downlights, only limited by the total current being drawn. It supports PWM current switching of up to 7A (84W at 12VDC and 168W at 24VDC). With an external switch it can also control Bi-color 3-wire light fixtures.
Control interfaces are provided to support:
Single and dual momentary pushbuttons
0-10V Analog control (external voltage or potentiometer)
4-20mA Analog control
Provides smooth dimming control to Imtra 2-wire PowerLEDs
Also supports bi-color dimming or combination single/bi-color lights
Supports 4-20mA analog input (from external control system)
Supports 0-10V potentiometer control (100k ohm)
Supports 0-10V analog input (from external control system)
Mounts with supplied brackets (or with 35mm DIN rail)
Name
Description
Certifications & Compliance Dimensions Dimmer Control Interface Housing Finish/Material Ingress Protection Input Voltage Load Rating Manufacturer Max Operating Temperature Warranty
CE, ROHS 2.75" l x 3.39" w x 2.30"h NO momentary, 0-10V analog external, 0-10V potentiometer, 4-20mA external White/PC IP40 (applies only to frontal water exposure, i.e. Exposed surface) 10-40VDC 7A Imtra 49°C (120°F) 2 Years
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.