The Automatic Lighting Control allows the use of existing overhead lights as emergency lights in the event power is lost. The control will allow normal operation of 24V lights in a specific area until the 110VAC power from the generator is interrupted. When the generator stops, the lighting control will turn on the lights using the ships battery. The unit will handle lights totaling up to 350W, controlled by a single, separate switch such as a bulkhead switch.
Compact design with integrated terminal strip connections
Automatically activates 24V overhead lights during generator power outage
Name
Description
Dimensions Input Voltage Install Location Load Rating Manufacturer Warranty
6.75" (172mm) width x 3.88" (98mm) depth x 5.50" (140mm) height 120VAC (generator), 24VDC (battery) Dry location 350W at 24VDC Imtra 5 Years / 1 Year Finish
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.