Intervolt SLD DuoDim 2-Channel Switchmode Dimmer, 9-33VDC, 16.5A, for dimming two lighting circuits from one single device using multiple momentary push-button switches.
Designed for 12V and 24V DC lighting circuits; the Intervolt SLD DuoDim model is a true two channel DC dimmer with separate control and monitoring for each circuit but can also be combined (grouped) to form a single circuit dimmer. For detailed information, download the product sheet and the installation instructions located on the right side of this page. Like the standard Intervolt SLD Switchmode dimmer, this model is enclosed in a sleek, thermally-efficient marine-grade housing featuring a heavy duty corrosion resistant terminal block with insulated barriers to prevent shorting. A mode selector switch allows the installer to change the control of the dimmer from two independent channels to two combined channels. In UNGROUP mode the total power output of the DuoDim is equally divided between the two channels. In GROUP mode the two channels can be combined and controlled with one switch only thereby using the total power of the whole dimmer as one. Thus the DuoDim is truly two dimmers in one!
These dimmers are controlled by an "normally-open" single pole single throw momentary switches (any brand).Features of this dimmer include:
Mode selector switch for dual channel or combined channel operation
Unique dual diagnostic LEDs to monitor both channels simultaneously
Built-in memory recalls last brightness setting, even on loss of power
Soft Start feature limits current to protect lamps from premature failure
Failsafe design ensures 50% light output in thermal shutdown mode
Supports unlimited numbers of momentary push-button switches
Protections: Transient Voltage, Short Circuit and Over Temperature
Name
Description
Certifications & Compliance Complete Off Control Interface Dimensions Dimmer Type Dimming Voltage Range Electrical Protections Housing Finish/Material Input Voltage Range Manufacturer No. of Switches Operating Temperature Power Capacity (Group Mode) Power Capacity (Ungroup Mode) Power Stacking Standby Current Draw Warranty
CE-EMC - Australian C Tick (AS2064) Yes Momentary Push-Button 5.32 x 3.15 x 1.58 in. (135 x 80 x 40mm) 2 Channel/Remote/Digital/Push-Button 10-98% of output voltage Over-Voltage, Over-Temperature, Transients, Short Circuit Marine grade anodized aluminum with ABS-PC end caps 9-33VDC Amelec Australia Unlimited (not supplied with dimmer) -25°C to +45°C 12V/200W, 24V/400W 12V/100W, 24V/200W No <10mA 2 Years
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.
