The InterVOLT SPCi Maxi Series Gen II power conditioners is a cutting edge product known for resolving many of the issues associated with DC power in vehicles and vessels. They are in fact a converter, stabilizer, isolator and regulator all built into a single innovative package. These devices feature galvanic isolation with no common connectivity between the input and output via positive or negative conductors. This means peace-of-mind when connecting sensitive and often expensive, high-end electronic equipment to the output. Other benefits include elimination of line interference, greater protection, better regulation and improved performance.
The GEN II unit has digital over analogue topology which allows the installer/operator to control and monitor various functions and provides valuable feedback on the status of the connected load.
The GEN II units are more compact due to multi-speed fan cooling and as a result no longer relies on convection for cooling.
Unique operator interface for control and monitoring
Galvanically isolated input to output – no common connectivity
Handy charge mode for charging an auxiliary battery (2 stage)
User adjustable output voltage from 12V to 14V (0.5V increments)
Diagnostic indicator: stand by mode, load on, short circuit, temperature
Remote operator control to turn unit on/off with signal current only
Multifunction alarm output for fault and pre-emptive warnings
Temperature and speed controlled internal cooling fan (Vapo bearing)
Compact design and can be mounted vertically or horizontally
Heavy duty termination with separate, removable terminal cover
High quality assembly featuring marine grade hardware
Conformally coated printed circuit board assembly
Name
Description
Certifications & Compliance Class Dimensions (L x W x H) Efficiency Electrical Protections Housing Finish/Material Ingress Protection Input Voltage Install Location Load Rating Manufacturer Max Operating Temperature Mounting Method Stand by current Warranty
CE-EMC, ROHS, Australian C-Tick B 9.10" (230mm) x 1.17" (110mm) x 2.17" (55mm) 91% nominal (load dependent) Transients, overload/short circuit, over temperature, over voltgae, reverse polarity, and more... Anodized 6063 aluminum, ABS/PC , stainless steel hardaware IP40 10.5-16VDC (down to 9V during operation) Dry loaction, vertical or horizontal 10A (continuous), Peak Load is 125% InterVolt 122° F (50°C) Screws (vertical or horizontal surface) 80mA (nominal) 2 Years
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.
