The Omega Series is a family of powerful, low-voltage DC LED wide angle recessed spots specifically designed for use on large yachts that typically have higher lux and greater lumen requirements. For new builds or as an LED upgrade, Omega matches the light output of a typical 35W MR16 halogen while consuming only 6.4 watts and emitting virtually no radiated heat. Omega’s LED color quality has been maximized in order to accentuate wood grains and render colored fabrics as accurately as possible. Choose from fixed round, pivoting round, or fixed square models.
Bright illumination for large rooms with elevated ceiling heights
80% less power compared to 35W halogen
Excellent color rending; ideal for rich wood grains, colored fabrics, healthy-looking skin tones
No exterior driver or power supply required
Compatible with Imtra's PWM dimmer and a host of automated monitoring & control systems
Name
Description
Beam Angle Certifications & Compliance Class Color Rendering Index Correlated Color Temperature (CCT) Cut-Out Dimensions Dimmer Compatibility Dimmer Control Interface Dimming Range Driver Efficiency Electrical Protections Halogen Equivalency Housing Finish/Material Ingress Protection Input Voltage Install Location Integrated Switch Lens Material Lifetime Hours Luminous Flux Manufacturer Mounting Method Output Color Power Consumption Trim Ring (Bezel) Finish/Material Warranty
66 dg CE-EMC III 95 2700K 2.95" (74.9mm) ILIM80120 N/O, Single or Double Throw Momentary Switch 0-100% Integrated 55% (Warm White) Over-voltage, reverse polarity, transients, EMC 35W Black electrophoretic-coated cast aluminum IP65 (applies only to frontal water exposure, i.e. Exposed surface) 10-30 VDC Ceiling overheads No Acrylite® 50000 350 lm Imtra Springs or screws Warm White 6.4W Brushed Stainless Steel 5 Years / 1 Year Finish
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.