Featuring 2-wire power & dimming, Blade easily replaces existing legacy (halogen) spots negating the need to run extra wires. Integrated drive electronics eliminates the need for remote driver installation. Carefully designed optics result in fully blended illumination free of annoying artifacts or distracting hot spots. A robust thermal management system results in maximum life with minimal lumens depreciation over its expected working life (50,000+ hrs). Blade offers single or bi-color dimming when paired with Imtra's single or dual channel PWM dimmer module. Blade features an ultra-flat round bezel in polished and brushed stainless or custom finishes. Blade conveniently & firmly installs with self-adjusting stainless steel springs. Made in the USA and covered by a 5-year warranty!
Ultra-flat stainless steel bezel design
Convenient 2-wire power & dimming (3-wires for Bi-Colors)
Bi-color dimming using single momentary switch (Bi-color models only)
Integrated current controlled drive circuitry
Convenient spring mounting (no screws needed)
Name
Description
Certifications & Compliance Class Color Rendering Index (CRI) Correlated Color Temperature (CCT) Cut-out Dimensions Dimensions Dimmer Compatibility Dimmer Control Interface Dimming Range Driver Electrical Protections Halogen Equivalency Housing Finish/Material Ingress Protection Input Voltage Install Location Integrated Switch Lens Material Lifetime Hours Luminous Flux Manufacturer Output Color Power Consumption Recessed Depth Trim Ring (Bezel) Dimensions
CE-EMC, ROHS III 85 6000K (White LED) 2.65" (67mm) See dimensional drawing ILIM80130, ILIM80140 Momentary Push-Button 5-100% Integrated Reverse Polarity, Transient & Spike Protection 25W Black Electrophoretic Aluminum IP65 (applies only to frontal water exposure, i.e. Exposed surface) 10-40VDC Ceilings (interior) No Frosted glass 50,000 hrs 297 lms Imtra Cool White/Blue 4.7W 1.09" (28mm) 3.63" (92mm) dia
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.
